Why front service led display?
1. Malfunction Modules replacing are easier & faster. which just need less than one minute to take out from the panel, realizing labor and maintenance cost saving.
2. While Traditional led display needs to take maintenance room into consideration, however front service solution will lessen your worry on these problems. And Newstar’s front service led display make things more flexible on the cases of embedded wall installation, Column Installation of double side display & wall-mounted installation.
3. Thinner and lighter case with advantages over the traditional fixed led cabinet.
1. Led Screen usually needs a high brightness: ≥6500 nits shows normally under strong bright sunlight.
2. Good quality led strip with low led attenuation, low default rate, and long lifespan.
3. With strictly IP65 rating testing before shipment which ensures screen work under heavy Raining environment.
4. Good resistance to deformation with high hardness panel body,
5. Excellent windy, corrosion resistance function after surface treatment.
6. Installation becomes easier and more fasten.
How can we do maintenance or repair when our assembling environment like the above cases?
Outdoor led Walls
|Outdoor SMD Front Service Series -Parameters 250mmx250mm module|
|Pixel Pitch||4.81 mm|
|Pixel Density||43222 pixel/㎡|
|Refresh Rate||≥ 1920Hz|
|Gray Scale||16 Bit|
|Brightness||≥ 6500 cd/㎡|
|Viewing Angle||H：140°, V:140°|
|Cabinet Resolution||156*156 Dots|
|IP Rating||Front IP65, Rear IP54|
|Working Humidity||10%~90% RH|
|Input Voltage||AC 110~220 V (±5%）|
|Blind spot rate||≤0.01%|